Kali Linux Wireless Tools




Install the Broadcom Drivers on "Kali Linux 2.0" – still about codename there that is on my laptop, but it's different from the previous issue about the Repository Kali Linux 2.0. This is now my wireless driver not detected directly by it. Wireless devices that are on gue G410 Broadcom is BCM43142. Series BCM43142 is quite hard in its use starting from drivers looking hard, until such time as I write this the series less support for injection.

To address wireless which is not detected on the "SANA" for Broadcom devices there is some solution as I have experienced. This installation is not intended only for Linux 2.0 "times there" just may be in another operating system based on open source but this time I'm trying the "SANA" is.



Here's how to Install the Broadcom Drivers On Linux 2.0 Time I try:
1. At an early stage we have to know that we have a series of Broadcom with syntax lspci | grep Network
2. It will come out info about Broadcom series we use, for example BCM43142
3. Then check where is the driver for our device compatibility here-> https://wireless.wiki.kernel.org/en/users/Drivers/b43
4. Find your Broadcom series that we use on the web, whether support for "b43" driver or "wl" on the column support and alternative.
5. The next step I for two ways to b43 driver and driver wl

Driver b43
Installation:
# apt-get install b43-fwcutter

Activate it:
# modprobe -r brcmsmac wl
# modprobe b43

Reboot, then check with the command:
# ifconfig -a | grep wlan0

Driver wl
Installation:
# apt-get install broadcom-sta-dkms

Activate it:
# modprobe -r b43 brcmsmac
# modprobe wl

Reboot, then check with the command:
# ifconfig -a | grep wlan0

good luck,,,


Next
Previous
Click here for Comments

0 comments: